Yamaha DME32 Owner's Manual page 247

The MIDI window appears, as shown below.
Click the Setup tab if the Setup page is not already shown.
2
The MIDI Setup parameters are explained in the following table.
Para-
Section
meter
Tx CH 1–16
MIDI
CH
Rx CH 1–16
Tx ON/OFF
Rx ON/OFF
Pro-
gram
Change
OMNI ON/OFF
ECHO ON/OFF
Tx ON/OFF
Rx ON/OFF
Control
Change
OMNI ON/OFF
ECHO ON/OFF
Tx ON/OFF
Parame
-ter Rx ON/OFF
Change
ECHO ON/OFF
Range
Selects the MIDI Channel used to transmit MIDI messages and
the Device Channel used to transmit Parameter Change mes-
sages
Selects the MIDI Channel used to receive MIDI messages and
the Device Channel used to receive Parameter Change mes-
sages
Determines whether or not Program Change messages are
transmitted when assigned scenes or configurations are
recalled
Determines whether or not assigned scenes or configurations
are recalled when Program Change messages are received
Determines whether the DME32 responds to Program Change
messages received on the specified MIDI Channel only or Pro-
gram Change messages received on all MIDI Channels
Determines whether Program Change messages received at
the MIDI IN port are echoed thru to the MIDI OUT port
Determines whether or not Control Change messages are
transmitted when assigned parameters are adjusted
Determines whether or not assigned parameters are adjusted
when Control Change messages are received
Determines whether the DME32 responds to Control Change
messages received on the specified MIDI Channel only or Con-
trol Change messages received on all MIDI Channels
Determines whether Control Change messages received at the
MIDI IN port are echoed thru to the MIDI OUT port
Determines whether or not Parameter Change messages are
transmitted when component parameters are adjusted
Determines whether or not component parameters are
adjusted when Parameter Change messages are received
Determines whether Parameter Change messages received at
the MIDI IN port are echoed thru to the MIDI OUT port
MIDI Settings
Description
DME32—Owner's Manual
243