Pc Cards & The Dme32; Inserting & Ejecting Pc Cards - Yamaha DME32 Owner's Manual

222
Chapter 12—PC Cards
PC Cards & the DME32
Configurations can be saved to and loaded from readily available
PCMCIA memory cards, also known as PC Cards. The DME32 sup-
ports Type II memory cards of any memory size. A single configura-
tion requires approximately 600K of memory.
If your PC supports PC Cards, configurations can be saved to a PC
Card and then loaded into the DME32 via its card slot. See page 60 for
information on saving configurations. Likewise, configurations stored
in the DME32 can be transferred to the PC by using PC Cards.
In a multiple-unit system, use only the PC Card slot on DME32 #1.
Inserting & Ejecting PC Cards
PC cards can be inserted or ejected while the DME32 is either on or off.
Insert the PC Card into the CARD slot, connector first and with the
1
labeled-side facing up.
To eject the PC Card, press the eject button at the side of the CARD slot.
2
Do not eject a PC Card while the DME32 is saving, loading, or deleting a configuration.
DME32—Owner's Manual
PC Card
(PCMCIA)
Type II
memory card