Enjoy Playing The Piano; Playing As An Acoustic Piano (Acoustic Mode) - Yamaha TransAcoustic TA3 Owner's Manual

Table of Contents

Advertisement

2

Enjoy Playing the Piano

This instrument can be played in the following modes depending on the circumstances and your personal preferences.
TA3
SH3
SC3
• Acoustic mode: You can play as a normal acoustic piano (see below).
• Quiet mode: You can play with the acoustic piano sound muted and listen to a digital sound through the headphones
(page 18).
TA3
SH3
SC3
• TransAcoustic mode: You can play with a digital sound and hear it through the resonance of the piano soundboard by
means of TransAcoustic technology (page 20). The acoustic piano sound is muted.
• Layer mode: You can play with a digital sound layered over the acoustic piano sound (page 21).
When the instrument is in the Quiet mode, TransAcoustic mode, or Layer mode, you can use various functions such as
playing with preset Voices or recording your performances. These functions can be used only when the power is turned
on. If you simply want to play in the Acoustic mode, turning on the power is not necessary.

Playing as an acoustic piano (Acoustic mode)

TA3
SH3
SC3
If you want to play the instrument as a normal acoustic piano, turning on the power is not necessary; simply play the
piano with the power turned off. If you are using an upright piano, or a grand piano equipped with a silencing lever, make
sure that the silencing lever or the silencing pedal is in the following position.
 For pianos with a silencing lever:
Pull the silencing lever forward to return it to the back position.
 For upright pianos without a silencing lever:
Press the silencing pedal (center pedal) to slide it to the right.
 For grand pianos without a silencing lever:
No operations are required.
While the power is turned on, pressing the [VOLUME] control lights up the [Aco.] lamp and enables you to play with
acoustic sound. In this condition, the Voice is automatically set to "---" (page 22).
Lights up
NOTE
• Pressing the [VOLUME] control again turns off the [Aco.] lamp and switches the instrument to the Quiet mode (page 18).
• (TA3 only) If you select a Voice other than "---," both the [Aco.] and [TA] lamps light, indicating that the instrument is in the Layer
mode (page 21).
TA3 SH3 SC3 Owner's Manual
17

Advertisement

Table of Contents
loading

Table of Contents