Advertisement
@ Control Change ON/OFF
pedals are operated.
°
°
°
MIDI/
ANO
PIANO
PIANO
CLAVIN
TRANSPOSE
!
1
2
3
e
O: O. C
Nr
PIANO = Control Change OFF
nio = Control Change ON
€ The Multi-Timbre Mode
o
o
o
o
MIDI/
ANO
PIANO
CLAVINOVA
E. PIA
TRANSPOSE
f
2
3
TONE
1
/ 3 0 ©
x<
cıavınova = Multi-Timble Mode ON
TONE
cuwiNova = Multi-Timble Mode OFF
TONE
Clavinova `
Hold down the [MIDI/TRANSPOSE] button.
Press the [PIANO 3] voice selector. If the PLANO 3 LED is lit when
the [PIANO 3] voice selector is pressed, you have turned control
change reception/transmission OFF. If the PIANO 3 LED is not lit
when the [PIANO 3] voice selector is pressed, you have turned control
change reception/transmission ON.
Release the [MIDI/TRANSPOSE] button.
Hold down the [MIDI/TRANSPOSE] button.
Press the [CLA VINOVA
TONE] voice selector. If the CLAVINOVA
TONE
LED is lit when the [CLAVINOVA TONE] voice selector is
pressed, you have turned the Multi-Timbre mode ON. If the
CLAVINOVA TONE LED is not lit when the [CLAVINOVA TONE]
voice selector is pressed, you have turned the Multi-Timbre mode OFF.
Release the [MIDI/TRANSPOSE] button.
A Multi-timbre Exampie
Here's an example of how you could use the Multi-Timbre mode to
record two different parts on the DRC-20 Disk Recorder that will play dif-
ferent voices on the Clavinova when played back.
Connect the DRC-20 to the Clavinova as shown to the left.
Activate the Clavinova Multi-Timbre mode.
Set the DRC-20 track 1 to record.
4 Select a voice and record the first part on the DRC-20.
Set ihe DRC-20 track 2 to record.
[1 Select a voice and record the second part on the DRC-20.
Still in the Multi-Timbre mode, play back the DRC-20. The recorded
parts will be played back using the individual voices selected during
recording, providing a full ensemble sound.
Advertisement
