Installing The Bumpers; Adjusting The Parking Brake - Toro 78562 Manual

11

Installing the Bumpers

Machines with MyRide™ Suspension
System
Parts needed for this procedure:
2 Bumper
2 Spacer
2 Locknut (5/16 inch)
Procedure
For 48-inch, 52-inch, and 60-inch decks, install the
bumpers to the 2 outside holes of the toeboard
Figure 37
1. Locknut
2. Spacer
For 72-inch decks, install the bumpers to the 2 inside holes
of the toeboard (Figure 38).
(Figure 37).
3. Bumper
1. Locknut
2. Spacer
12

Adjusting the Parking Brake

No Parts Required
Procedure
Check to make sure the parking brake is adjusted properly.
Refer to your Operator's Manual for the correct procedure.
19
Figure 38
3. Bumper