Collect Call Barring For Fax/Did - Siemens HiPath 1100 Series Programming Manual

Step by Step
1
*

Collect Call Barring for Fax/DID

When Collect Call Barring is active, all collect calls made
to a Fax/DID are automatically rejected by the system.
Call Barring will not work in the case of calls transferred
to a Fax/DID.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 0 8
... Select an operating mode for the Fax/DID Module:
4
= Fax
1
= DID
2
= Fax/DID
3
= Message (announcement)
4
or Activate/Deactivate Collect Call Barring for the selected
#
mode:
= To activate
*
= To deactivate (default)
#
Enter the next operating mode
or
Press this key.
#
Initial state for Programming Mode.
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.
Fax/DID Module
113