Overflow/Escape Extension - Siemens HiPath 1100 Series Programming Manual

Programming an Extension
Step by Step
60

Overflow/Escape Extension

An Overflow Extension (Escape Extension) is config-
ured to answer calls only when the extension called is
not available.
Examples:
• The extension called is activated for room monitor-
ing (Babyphone)
• The extension that was programmed as the first
attendant is currently assigned as Door Opener
• No extension is configured (all extensions were
deleted using the code "42").
By default, the first extension of the system is config-
ured as the Overflow Extension for Busy signal or
Wrong Number.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
3 2
... Choose a list for Call Forwarding:
1 3
= No answer
1
= Busy
2
= Wrong number
3
Enter the extension number (e.g., 12 /102) to be added
to the list.
Initial state for Programming Mode.
The Overflow Extension is accessed using your
own internal number.
The Overflow Extension cannot be configured or
used for Fax.