Step by Step
1
13 seconds for Argentina and 06 seconds for all
other countries.
Coefficient for an External Analog Line
If the appropriate impedance value or type of external
line is available, the quality of transmission and recep-
tion of information between the local carrier and the
PABX can be improved.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
4 7
Enter a number for an external analog line (e.g., 801).
...
Enter the appropriate number for the type of external
4
line. For Brazil, for example:
= 900 Ω Standard Line (default)
1
= 600 Ω Line
2
= Long Line
3
= Short Line
4
Enter the next external line number.
or
Press this key.
#
Initial state for Programming Mode.
Polarity Reversal
When a carrier provides this facility, the CDR process
occurs in real time. That is, when the party called
answers/hangs up, the public exchange sends a signal
to the system to initiate/end Call Detail Report.
The default setting for this feature is Deactivated.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
5 8
Enter a number for an external analog line (e.g., 801).
Programming an External Line
37