Activating Callback/Urgent Call With Timeout; Call Name/Number Display - Siemens HiPath 1100 Series Programming Manual

Step by Step
*
1
Activating Callback/Urgent Call with
Timeout
When an extension or external number is busy, this
configuration allows you to set a timeout for activating
the Callback or Urgent Call features after approximately
7 seconds.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 3 7
or Activate/Deactivate the features:
#
* = To activate Callback and deactivate Urgent Call
= To deactivate Callback and activate Urgent Call
#
(default)
Initial state for Programming Mode.

Call Name/Number Display

This feature enables Caller ID information to be
displayed on an extension's telephone display.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 3 9
... Select the information to be shown on the display:
3
= Name and number (default)
1
= Name only
2
= Number only
3
Initial state for Programming Mode.
Programming an Extension
45