Deactivating Call Forwarding For Fax, Pc Or "Busy; Changing Call Forwarding For Another Terminal - Siemens HiPath 4000 Operating Instructions Manual

Forwarding calls
Step by Step
Store
Store
42
Deactivating call forwarding for fax, PC or
"busy"
n
Lift the handset.
Press the key. The lamp lights up.
p
Enter the code for deactivating the particular type of call
forwarding. The codes are defined by System Support.
You can enter your call forwarding deactivation codes in
the following table:
"Deactivate call forwarding for fax":
"Deactivate call forwarding for PC":
"Deactivate call forwarding for busy":
pr
Enter the number of the other terminal and confirm
your input with the square key.
pr
Enter the PIN of the other terminal and confirm your in-
put with the square key.
r
or Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
Wait for the acknowledgment tone.
Press the key. The lamp goes out.
t
Replace the handset.
Changing call forwarding for another
terminal
The procedure is exactly the same as for Store/
Activate:
for another telephone ! page 39,
for fax, PC or busy ! page 40.
#43
#42
#49