Table of Contents
Advertisement
Replacing light bulb
Front turn signal lights (vehicles
■
with single-beam headlights)
1
Turn the bulb base counterclock-
wise.
2
Remove the light bulb.
3
When installing, reverse the steps
listed.
WARNING
Replacing light bulb
■
Turn off the light. Do not attempt to
●
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
●
Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
6-3. Do-it-yourself maintenance
●
Fully install light bulb and any parts
used to secure it. Failure to do so may
result in heat damage, fire, or water
entering the light unit. This may dam-
age the light or cause condensation to
build up on the lens.
To prevent damage or fire
■
●
Make sure bulb is fully seated and
locked.
Check the wattage of the bulb before
●
installing to prevent heat damage.
351
6
Advertisement
Table of Contents
