Table of Contents
Advertisement
Top tether strap
B
Fixing the top tether strap to the
■
anchor bracket
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
1
If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head
restraint.
2
Latch the hook onto the anchor
bracket and tighten the top tether
strap.
Make sure the top tether strap is securely
latched.
Top tether strap
A
Hook
B
1-2. Child safety
Laws and regulations pertaining to
■
anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming to
FMVSS213 or CMVSS213 specifications
can be used.
This vehicle is designed to conform to SAE
J1819.
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
Firmly attach the top tether strap and
●
make sure that the belt is not twisted.
Do not attach the top tether strap to
●
anything other than the anchor
bracket.
Shake the child restraint system left
●
and right, and forward and backward
to ensure that it has been securely
installed.
After securing a child restraint system,
●
never adjust the seat.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
55
1
Advertisement
Table of Contents
