Table of Contents
Advertisement
Booster seat
■
1
If installing the child restraint sys-
tem to the front passenger seat is
unavoidable, refer to P.47for front
passenger seat adjustment.
2
High back type: If the head restraint
interferes with your child restraint
system, and the head restraint can
be removed, remove the head
restraint.
3
Place the child restraint system on
the seat facing the front of the vehi-
cle.
Booster type
1-2. Child safety
High back type
4
Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Check that the shoulder belt is correctly
positioned over the child's shoulder and
that the lap belt is as low as possible.
(P.27)
Removing a child restraint system
■
installed with a seat belt
Press the buckle release button and
fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to the
rebound of the seat cushion. Release the
buckle while holding down the child
restraint system.
Since the seat belt automatically reels itself,
slowly return it to the stowing position.
51
1
Advertisement
Table of Contents
