Warning Messages And Buzzers; Turning Asc System On; Asc (Active Sound Control); Asc (Active Sound Control)165 - Lexus UX200 2021 Manual

If "Brake Hold Fault Depress Brake to
■
Deactivate Visit Your Dealer" or
"Brake Hold Malfunction Visit Your
Dealer" is displayed on the multi-infor-
mation display
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer.

Warning messages and buzzers

■
Warning messages and buzzers are used to
indicate a system malfunction or to inform
the driver of the need for caution. If a warn-
ing message is shown on the multi-informa-
tion display, read the message and follow
the instructions.
If the brake hold operated indicator
■
flashes
P.365
WARNING
When the vehicle is on a steep incline
■
When using the brake hold system on a
steep incline, exercise caution. The brake
hold function may not hold the vehicle in
such a situation.
When stopped on a slippery road
■
The system cannot stop the vehicle when
the gripping ability of the tires has been
exceeded. Do not use the system when
stopped on a slippery road.
NOTICE
When parking the vehicle
■
The brake hold system is not designed
for use when parking the vehicle for a
long period of time. Turning the engine
switch off while the system is holding the
brake may release the brake, which
would cause the vehicle to move. When
operating the engine switch, depress the
brake pedal, shift the shift lever to P and
set the parking brake.
4-2. Driving procedures
ASC (Active Sound Con-
*
trol)
*
: If equipped
The ASC system directs certain
sounds from the front of the cabin
to the vehicle interior, and harmo-
nizes these sounds with the actual
sound of the engine and exhaust in
order to allow the driver to feel
acceleration and the state of the
engine more strongly.

Turning ASC system on

Press the ASC switch.
The indicator on the switch will turn on.
Press the ASC switch again to turn the
ASC system off.
Even if the indicator is illuminated, when
the driving mode (P.245) is set to Eco
drive mode, ASC system does not oper-
ate.
■ Operating conditions
The ASC system operates when the driving
mode (P.245) is set to other than Eco
drive mode.
165
4