When the steering lock cannot be
●
released, "Push Engine Switch while
Turning Steering Wheel in Either Direc-
tion" will be displayed on the multi-infor-
mation display.
Check that the shift lever is in P. Press the
engine switch shortly and firmly while
turning the steering wheel left and right.
To prevent the steering lock motor from
●
overheating, operation of the motor may
be suspended if the engine is turned on
and off repeatedly in a short period of
time. In this case, refrain from running the
engine. After about 10 seconds, the
steering lock motor will resume function-
ing.
■
Electronic key battery
P.344
Operation of the engine switch
■
●
If the switch is not pressed shortly and
firmly, the engine switch mode may not
change or the engine may not start.
If attempting to restart the engine imme-
●
diately after turning the engine switch off,
the engine may not start in some cases.
After turning the engine switch off, please
wait a few seconds before restarting the
engine.
Customization
■
If the smart access system with push-button
start has been deactivated in a customized
setting, refer to P.384.
4-2. Driving procedures
WARNING
When starting the engine
■
Always start the engine while sitting in
the driver's seat. Do not depress the
accelerator pedal while starting the
engine under any circumstances.
Doing so may cause an accident result-
ing in death or serious injury.
Caution while driving
■
If engine failure occurs while the vehicle
is moving, do not lock or open the doors
until the vehicle reaches a safe and com-
plete stop. The steering lock function will
activate and this may lead to an accident,
resulting in death or serious injury.
NOTICE
When starting the engine
■
●
Do not race a cold engine.
If the engine becomes difficult to start
●
or stalls frequently, have your vehicle
checked by your Lexus dealer imme-
diately.
Symptoms indicating a malfunction
■
with the engine switch
If the engine switch seems to be operat-
ing somewhat differently than usual, such
as the switch sticking slightly, there may
be a malfunction. Contact your Lexus
dealer immediately.
Stopping the engine
1
Stop the vehicle completely.
2
Set the parking brake (P.161),
and shift the shift lever to P
(P.156).
3
Press the engine switch.
4
Release the brake pedal and check
that "ACCESSORY" or "IGNI-
TION ON" is not shown on the
meter.
153
4