Table of Contents
Advertisement
386
7-2. Steps to take in an emergency
setting, the engine switch will turn to ACC.
3
Firmly depress the brake pedal and
check that
multi-information display.
4
Press the engine switch.
In the event that the engine still cannot be
started, contact your Lexus dealer.
■
Stopping the engine
Set the parking brake, shift the shift lever to
P and press the engine switch as you nor-
mally do when stopping the engine.
■
Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.344)
Changing engine switch modes
■
Release the brake pedal and press the
engine switch in step
The engine does not start and modes will be
changed each time the switch is pressed.
(P.155)
is shown on the
3
above.
If the vehicle battery is dis-
charged
The following procedures may be
used to start the engine if the vehi-
cle's battery is discharged.
You can also call your Lexus dealer
or a qualified repair shop.
Restarting the engine
If you have a set of jumper (or booster)
cables and a second vehicle with a bat-
tery, you can jump start your vehicle by
following the steps below.
1
Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and doors locked.
(P.64)
2
Open the hood (P.321)
Advertisement
Table of Contents
