348
6-3. Do-it-yourself maintenance
After a fuse is replaced
■
When installing the lid, make sure that the
●
tab is installed securely.
If the lights do not turn on even after the
●
fuse has been replaced, a bulb may need
replacement. (P.350)
●
If the replaced fuse blows again, have the
vehicle inspected by your Lexus dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting
the wiring harness from damage.
■
When replacing light bulbs
Lexus recommends that you use genuine
Lexus products designed for this vehicle.
Because certain bulbs are connected to cir-
cuits designed to prevent overload, non-
genuine parts or parts not designed for this
vehicle may be unusable.
WARNING
To prevent system breakdowns and
■
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
●
Never use a fuse of a higher amperage
rating than that indicated, or use any
other object in place of a fuse.
●
Always use a genuine Lexus fuse or
equivalent.
Never replace a fuse with a wire, even
as a temporary fix.
●
Do not modify the fuses or fuse boxes.
NOTICE
Before replacing fuses
■
Have the cause of electrical overload
determined and repaired by your Lexus
dealer as soon as possible.
Headlight aim
Vertical movement adjusting
bolts
Single-beam headlights
Adjustment bolt A
A
Adjustment bolt B
B
Triple-beam headlights
Adjustment bolt A
A
Adjustment bolt B
B
Before checking the headlight
aim
Make sure the vehicle has a full tank
of gasoline and the area around the
headlight is not deformed.
Park the vehicle on level ground.
Make sure the tire inflation pressure