Table of Contents
Advertisement
3
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
To stop the position recall operation
■
part-way through
Perform any of the following:
Press the "SET" button.
●
●
Press button "1", "2" or "3".
Operate any of the seat adjustment
●
switches (only cancels seat position
recall).
●
Operate the tilt and telescopic steering
control switch (only cancels steering
wheel position recall).
Operating the driving position memory
■
after turning the engine switch off
Recorded seat positions can be activated
up to 180 seconds after the driver's door is
opened and another 60 seconds after it is
closed again.
When the recorded seat position can-
■
not be recalled
The seat position may not be recalled in
some situations when the seat position is
recorded in a certain range. For details,
contact your Lexus dealer.
3-3. Adjusting the seats
Registering/canceling/recall-
ing a driving position to an elec-
tronic key (including a card key)
(memory recall function)
Registering procedure
■
Record your driving position to button
"1", "2" or "3" before performing the
following:
Carry only the key you want to regis-
ter, and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
3
Recall the driving position that you
want to record.
4
While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Cancelation procedure
■
1
Carry only the key you want to can-
cel and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled prop-
125
3
Advertisement
Table of Contents
