Back Door Closer; Power Back Door Operating Conditions; Back Door Reserve Lock Function - Lexus UX200 2021 Manual

Table of Contents

Advertisement

for the operation to occur.
Kick sensor
A
Hands Free Power Back Door
B
operation detection area
3
When the kick sensor detects that
your foot is pulled back, a buzzer
will sound and the back door will
automatically fully open/close.
If a foot is moved under the rear bumper
while the back door is operating, the back
door will stop moving.
Luggage compartment light
The luggage compartment light turns on
when the back door is opened.
If the luggage compartment light is left on
when the engine switch is turned off, the
light will go off automatically after 20
minutes.

Power back door operating conditions

With the power back door operations set to
ON, it can automatically open and close for
the following conditions:
The power back door is unlocked. How-
ever, the power back door will operate if
it is locked, in the following situations:
• When the electronic key is being carried
and the power back door opener switch
is pressed
• When the wireless remote control is
*
used
When the engine switch is in ON, in addi-
tion to the above for the opening opera-
tions, the back door operates for any of
3-2. Opening, closing and locking the doors
the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
*
: When configured with the customization
function so that it can be operated after
being unlocked, operate the back door
after it has been unlocked.
Hands Free Power Back Door operat-
ing conditions
When the Hands Free Power Back Door
operation setting is turned on
When an electronic key is carried within
the operation range

Back door closer

In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the engine switch, the
back door closer operates.
Operation of the power back door
A buzzer sounds and the emergency
flashers flash twice to indicate that the
back door is opening/closing.
When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
When the power back door automati-
cally opens, if an abnormality due to peo-
ple or objects is detected, operation will
stop.

Back door reserve lock function

This function reserves locking of all doors
beforehand, when the power back door is
open.
When the following procedure is per-
formed, all the doors except the power
back door are locked and then power back
door will also be locked at the same time it
is closed.
1
Close all doors, except the back door.
2
During the power back door closing
operation, lock the doors using the
smart access system with push-button
start (P.98) or the wireless remote
control. (P.96)
107
3

Advertisement

Table of Contents
loading

Table of Contents