Table of Contents
Advertisement
Installing child restraint system
■
using a seat belt (child restraint
lock function belt)
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
Rear-facing Infant seat/con-
■
vertible seat
1
Place the child restraint system on
the rear seat facing the rear of the
vehicle.
2
Run the seat belt through the child
restraint system and insert the plate
into the buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt and
allow it to retract to put it in lock
1-2. Child safety
mode. In lock mode, the belt cannot
be extended.
4
While pushing the child restraint
system down into the rear seat,
allow the shoulder belt to retract
until the child restraint system is
securely in place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
5
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
Forward-facing Convertible
■
seat
1
Adjust the seat
When using the front passenger seat: If
installing the child restraint system to the
front passenger seat is unavoidable, refer
to P.47for front passenger seat adjust-
ment.
49
1
Advertisement
Table of Contents
