Turn Signal Lever - Lexus UX200 2021 Manual

160
4-2. Driving procedures
When the vehicle is stopped, the trans-
●
mission is set at M1.
Downshifting restriction warning
■
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch (if
equipped) is operated. (A buzzer will sound
twice.)
■ If the "M" indicator does not come on or
the "D" indicator is displayed even after
shifting the shift lever to M
This may indicate a malfunction in the auto-
matic transmission system. Have the vehicle
inspected by your Lexus dealer.
(In this situation, the transmission will oper-
ate in the same manner as when the shift
lever is in D.)

Turn signal lever

Operating instructions
The turn signal lever can be used to
show the following intentions of the
driver.
1
Right turn
2
Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3
Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4
Left turn
■ Turn signals can be operated when
The engine switch is in ON.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear
turn signal lights has not burned out.