Table of Contents
Advertisement
168
4-3. Operating the lights and wipers
Turning on the high beam head-
lights
1
With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2
Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
AFS (Adaptive Front-lighting
System) (if equipped)
AFS (Adaptive Front-lighting System)
secures excellent visibility at intersec-
tions and on curves by automatically
adjusting the direction of the light axis
of the headlights according to vehicle
speed and the degree of the tire's
angle as controlled by steering input.
AFS operates at speeds of approximately
6 mph (10 km/h) or higher.
Customization
■
Some functions can be customized.
(P.412)
Cornering lights (if equipped)
When any of the following conditions is
met, while the headlights (low beam)
are on, the cornering lights will addi-
tionally turn on and light up the direc-
tion of movement for the vehicle. This is
to ensure excellent visibility when
either driving at intersections or park-
ing at night.
The steering wheel is operated
The turn signal lever is operated
The shift lever is in R (both left and
right side cornering lights)
Cornering light control
■
●
The lights illuminate when the vehicle
speed is approximately 19 mph (30
km/h) or less. However, the lights turn off
when the vehicle speed increases to
approximately 22 mph (35 km/h) or
more.
After the lights remain illuminated for 30
●
minutes, they automatically turn off.
Advertisement
Table of Contents
