Then, connect a negative cable clamp to
nect the clamp at the other end of the negative cable to
Exclusive jump starting terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the exclusive jump starting
D
terminal and any moving parts as shown in the illustration
6
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the battery of your vehi-
cle.
7
Open and close any of the door of
your vehicle with the engine switch
OFF.
8
Maintain the engine speed of the
second vehicle and start the engine
of your vehicle by turning the
engine switch to ON.
9
Once the vehicle's engine has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
7-2. Steps to take in an emergency
on the second vehicle and con-
C
10
Close the exclusive jump starting
terminal cover, and reinstall the
fuse box cover to its original posi-
tion.
Once the engine starts, have the vehicle
inspected at your Lexus dealer as soon as
possible.
Starting the engine when the battery is
■
discharged
The engine cannot be started by push-start-
ing.
To prevent battery discharge
■
●
Turn off the headlights and the audio sys-
tem while the engine is stopped.
Turn off any unnecessary electrical com-
●
ponents when the vehicle is running at a
low speed for an extended period, such
as in heavy traffic.
.
D
335
7