Loading Special Paper - Fuji Xerox ApeosPort C7070 Reference Manual

Reference Guide - Main Unit
3.
When loading paper whose size is JIS B4 or larger, pinch
the knob and lift the paper rear end guide, and set the
guide into the hole for the indicated size.
4.
Pinch the two guide clips, and adjust to the correct
paper size.
5.
Fan a stack of paper, face the print surface up, and then
load the paper with edges aligned according to the
direction of the arrow.
Important
Do not load paper above the maximum fill line. It
may cause paper jams or machine malfunction.
Note
Adjust the guide correctly to the size of paper. If the
guide is not adjusted correctly, the machine cannot
feed the paper properly, resulting in paper jams.
6.
Push in the paper tray.

Loading special paper


Hole Punched paper
Paper orientation: Load paper with holes facing the left side when viewed from the front of the machine

Postcards
Paper orientation: SEF

Envelopes
Install an optional Envelope Tray.
Usable tray: Tray 1
Paper orientation when the flaps are open: Flaps come at the right when viewed from the front of the
machine
Paper orientation when the flaps are closed: Flaps come at the left when viewed from the front of the
machine
Paper size Width
Length
Paper weight Envelopes
Postcards
Maximum number of sheets
90 to 241 mm
98 to 372 mm
2
75 to 90 g/m
2
106 to 220 g/m
50 sheets (Ncolor envelopes)
-10-
3
2
1