Table of Contents
Advertisement
1.7
Extension setting 3 servo parameters group ([Pr.
PF_ _ ])
[Pr. PF02_Function selection F-2 (*FOP2)]
Initial value
00000000h
[Pr. PF02.4_Memory writing frequency warning enable/disable selection]
Initial value
0h
Enable or disable [AL. 1F8.1 Memory writing frequency warning].
[AL. 1F8.1] indicates that the memory writing frequency has exceeded the guaranteed number of times.
If the servo amplifier continues to be used while the alarm is disabled with this servo parameter, the memory may be
corrupted and restoration of the data, such as servo parameters, may fail.
0: Enabled
1: Disabled
[Pr. PF02.5_Memory free space warning enable/disable selection]
Initial value
0h
Select whether to enable or disable [AL. 1F8.2 Memory free space warning].
[AL. 1F8.2] indicates that the memory free space is running low.
If the servo amplifier continues to be used while the alarm is disabled with this servo parameter, [AL. 119.7 Memory free space
4-1] may occur and data restoration may fail.
0: Enabled
1: Disabled
[Pr. PF06_Function selection F-5 (*FOP5)]
Initial value
00000013h
[Pr. PF06.0_Electronic dynamic brake selection]
Initial value
3h
Enable or disable the electronic dynamic brake.
2: Disabled
3: Enabled only for specific servo motors
Refer to the following table for the specific servo motors.
Series
HG-KNS
HG-SNS
[Pr. PF12_Electronic dynamic brake operating time (DBT)]
Initial value
2000 [ms]
Set an operating time for the electronic dynamic brake.
1 SERVO PARAMETER DETAILS
80
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Servo motor
HG-KNS13/HG-KNS23/HG-KNS43
HG-SNS52
Setting range
0 to 10000
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4
Advertisement
Table of Contents
