[Pr. PA28_Function selection A-6 (**AOP6)]
Initial value
00000000h
[Pr. PA28.4_Speed range limit selection]
Initial value
0h
Select the speed to be used for the range restriction of the speed data.
0: Maximum speed
1: Permissible speed
[Pr. PA34_Quick tuning - Permissible travel distance (QDIS)]
Initial value
0 [0.1 rev], [mm]
Set the permissible travel distance for quick tuning.
If the travel distance for quick tuning exceeds the setting value, the quick tuning error occurs.
When "0" is inputted, the permissible travel distance for quick tuning is 1.0 rev (when a linear servo motor is used, 10 mm).
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
0 to 100
1.2 Basic setting servo parameters group ([Pr. PA_ _ ])
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4
1 SERVO PARAMETER DETAILS
1
25