[Pr. Pv24_Speed Unit Conversion - Electronic Gear - Denominator (*Vcdv)]; [Pr. Pv25_Acceleration Unit Conversion - Electronic Gear - Numerator (*Acmx)]; [Pr. Pv26_Acceleration Unit Conversion - Electronic Gear - Denominator (*Acdv)] - Mitsubishi Electric Melservo-Jet MR-JET-G User Manual

[Pr. PV24_Speed unit conversion - Electronic gear - Denominator
(*VCDV)]
Initial value
1
Set the electric gear denominator for converting the speed command (command unit/s) into a value in speed units.
This function is enabled when [Pr. PT01.1 Speed/acceleration/deceleration unit selection] is set to "1".
[Pr. PV25_Acceleration unit conversion - Electronic gear -
Numerator (*ACMX)]
Initial value
1
Set the electric gear numerator for converting the acceleration (command unit/s
units.
This function is enabled when [Pr. PT01.1 Speed/acceleration/deceleration unit selection] is set to "1".
[Pr. PV26_Acceleration unit conversion - Electronic gear -
Denominator (*ACDV)]
Initial value
1
Set the electric gear denominator for converting the acceleration (command unit/s
units.
This function is enabled when [Pr. PT01.1 Speed/acceleration/deceleration unit selection] is set to "1".
Setting range
1 to 256
Setting range
1 to 1024
Setting range
1 to 256
1.11 Positioning extension setting servo parameters group ([Pr. PV_ _ ])
Ver.
A4
Ver.
A4
2
) into a value in acceleration/deceleration
Ver.
A4
2
) into a value in acceleration/deceleration
1 SERVO PARAMETER DETAILS
1
117