Table of Contents
Advertisement
[Pr. PF84_Drive recorder - Trigger channel selection (DRTC)]
Initial value
00008101h
[Pr. PF84.0-1_Drive recorder - Trigger channel selection 1]
Initial value
01h
Set the trigger channel No. 1 of the drive recorder.
The servo parameter is disabled in the following conditions.
• [Pr. PF80.0 Drive recorder - Operation mode selection] is set to "0" (automatic setting mode)
• [Pr. PF82.0 Drive recorder - Trigger mode selection] is set to "0" (alarm trigger)
Setting value
01
02
03
04
05
06
07
81
82
83
84
85
86
87
88
[Pr. PF84.2-3_Drive recorder - Trigger channel selection 2]
Initial value
81h
Set the trigger channel No. 2 of the drive recorder. The setting value is the same as that of [Pr. PF84.0-1].
The servo parameter is disabled in the following conditions.
• [Pr. PF80.0 Drive recorder - Operation mode selection] is set to "0" (automatic setting mode)
• [Pr. PF82.0 Drive recorder - Trigger mode selection] is set to "0" (alarm trigger)
• [Pr. PF82.1 Drive recorder - Trigger binding condition selection] is set to "0" (disabled)
[Pr. PF84.4-5_Drive recorder - Trigger position setting]
Initial value
5Ah
Convert trigger position 1 (0 % to 100 % of the total sampling time of the drive recorder) to a hexadecimal value, and set the
value. When trigger position 1 exceeds 100 %, the value will be clamped to 100 %.
For example, to set the trigger position to 30 %, set "1Eh" in this servo parameter.
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Meaning
Analog channel 1
Analog channel 2
Analog channel 3
Analog channel 4
Analog channel 5
Analog channel 6
Analog channel 7
Digital channel 1
Digital channel 2
Digital channel 3
Digital channel 4
Digital channel 5
Digital channel 6
Digital channel 7
Digital channel 8
Setting range
Refer to the text
Setting range
00h to 6Fh
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4
Ver.
A4
1 SERVO PARAMETER DETAILS
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
1
87
Advertisement
Table of Contents
