[Pr. Pa28_Function Selection A-6 (**Aop6)]; [Pr. Pa34_Quick Tuning - Permissible Travel Distance (Qdis)] - Mitsubishi Electric MELSERVO MR-J5W-B Series User Manual

[Pr. PA28_Function selection A-6 (**AOP6)]

Initial value
00000000h
[Pr. PA28.4_Speed range limit selection]
Initial value
0h
Select the speed to be used for the range restriction of the speed data.
If "1" (permissible speed) is set when the servo amplifier is connected with a servo motor of HK series, the maximum speed
will be selected.
0: Maximum speed
1: Permissible speed

[Pr. PA34_Quick tuning - Permissible travel distance (QDIS)]

Initial value
0 [0.1 rev], [mm]
Set the permissible travel distance for quick tuning.
If the travel distance for quick tuning exceeds the setting value, the quick tuning error occurs.
When "0" is input, the permissible travel distance for quick tuning is 1.0 rev (when a linear servo motor is used, 10 mm).
1 SERVO PARAMETER DETAILS
28
1.2 Basic setting servo parameters group ([Pr. PA_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
0 to 100
Setting method
Each axis
Ver.
C4
Setting method
Each axis
Ver.
Refer to the relevant detail No.
Ver.
C4