Recording Functions: Auto Rec - Zoom H4n Pro Operation Manual

2-01-1

Recording functions: AUTO REC

The H4n Pro can detect when the input level exceeds a preset level and automatically start recording from recording standby.
1
2
3
4
063
Press the MENU button for more than
2 seconds, and start operation from
the top screen.
Press.
Select REC and press.
Select AUTO REC and press.
Select START LVL (starting level)
and press.
5
Adjust the level.
Set the input level that will start
recording automatically.
6
Select ON/OFF and
press.
7
Select ON and press.
HINT:
"Wait for Signal" message
If the AUTO REC function is
ON, "Wait for Signal" appears
when in recording standby.
The unit is sensing whether
the input level exceeds the
recording start level.
Start level
Current input level
When "Wait for Signal"
appears, you can press the
REC button to start recording
manually.
NOTE:
• You cannot make this
setting during recording or
playback.
• You cannot use this func-
tion together with REC
LEVEL AUTO, PRE REC or
PRE COUNT.