Husqvarna P524 EFI Workshop Manual page 42

4. Compress the clips on the PTO button and push the
PTO button up through the panel.
5. Assemble in opposite sequence.
9.3.10 To replace the throttle control
1. Remove the screw on the knob on the throttle
control lever and remove the knob on the throttle
control lever.
2. Remove the side cover of the control panel. Refer to
To remove the covers on page 23 .
3. Disconnect the throttle control connection from the
circuit board.
42 - Repair instructions
4. Loosen the screw that holds the circuit board and
move the circuit board to the side.
5. Remove the 2 screws on the throttle control bracket
and pull out the throttle control.
6. Remove the screws that hold the throttle control to
the bracket.
7. Assemble in opposite sequence.
9.3.11 To replace the 12V switch
1. Remove the side cover of the control panel. Refer to
To remove the covers on page 23 .
2. Disconnect the 12V switch connection from the
circuit board.
3. Push the 12V switch up through the control panel.
4. Assemble in opposite sequence.
9.3.12 To replace the 12V socket
1. Remove the side cover of the control panel. Refer to
To remove the covers on page 23 .
2. Disconnect the 12V socket connection from the
circuit board.
662 - 001 - 23.10.2018