Husqvarna P524 EFI Workshop Manual page 26

5. Tighten the nuts moderately to prevent damage to
the threads.
6. Make sure that the parking brake operates correctly.
9.1.4 Wheel hub
9.1.4.1 To disassemble and assemble the wheel hub
1. Put a jack assembly below the product. The
illustration shows where to put the supports.
2. Lift the product.
3. Remove the wheel bolts.
4. Remove the wheel.
26 - Repair instructions
5. Remove the snap ring and washer in the center of
the wheel hub.
6. Remove the screws on the wheel hub.
662 - 001 - 23.10.2018