Husqvarna P524 EFI Workshop Manual page 24

9.1.1.6 To remove the right footrest plate
1. Turn and remove the knob on the rearward drive
pedal (A).
2. Remove the 2 screws (B and C) and remove the
footrest plate.
9.1.1.7 To remove the left footrest plate
• Remove the 3 screws and remove the footrest plate.
9.1.2 Seat
9.1.2.1 To disassemble and assemble the seat
1. Tilt the seat.
2. Turn the connector counterclockwise to remove the
seat safety switch.
24 - Repair instructions
C
B
A
3. Remove the 4 bolts from the adjustable seat
bracket.
4. Remove the seat.
5. Assemble in opposite sequence.
9.1.3 Parking brake
9.1.3.1 To do a check of the parking brake
1. Park the product on a hard surface that slopes.
Note: Do not park the product on a grass slope
when you do a check of the parking brake.
2. Press the parking brake pedal down (A).
3. Press and hold the lock button (B) and release the
parking brake pedal while the button is pressed.
4. If the product starts to move, let an approved service
agent adjust the parking brake.
5. Press the parking brake pedal again to release the
parking brake.
A
B
662 - 001 - 23.10.2018