Main Nas Starter Utility Screen - ZyXEL Communications NAS Series User Manual

Table 2 NAS Seeker (continued)
LABEL
Status
Server Name
IP Address

2.3.2 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select an NAS in the NAS Seeker screen.
Figure 8 NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 3 NAS Starter Utility Main Screen
LABEL
?
Configuration
NAS Seeker
Server Name
IP Address
Chapter 2 Getting Started
DESCRIPTION
This shows whether the NAS is Online, Unreachable, Configuring, or Config Failed.
This is the server name you configured for the NAS. If you have more than one NAS in
your network, it is recommended that you give each one a unique name for identification
purposes.
This is the current IP address of the NAS.
DESCRIPTION
Click this to display the utility help.
Click this to configure system settings (see
Click this to use the NAS Seeker screen
a different NAS on your network.
This is the server name you configured for the NAS. If you have more than one NAS in
your network, it is recommended that you give each one a unique name for identification
purposes.
This is the current IP address of the NAS.
Cloud Storage User's Guide
21
Section 2.3.5 on page
(Section 2.3.1 on page 20) to find and connect to
23).