Table of Contents
Advertisement
10.1 Overview
This chapter discusses the Control Panel screens. Use the Control Panel screens to configure
network settings and upload firmware.
10.2 What You Can Do
• Use the TCP/IP screen
connection settings such as the teaming mode and IP addresses.
• Use the PPPoE screen
Internet connection.
• Use the UPnP Port Mapping screen
Internet gateway's firewall and Network Address Translation (NAT) to allow access to the NAS
from the Internet.
• Use the Terminal screen
• Use the DyDNS screen
your NAS.
• Use the FW Upgrade screen
10.3 What You Need to Know
IP Address
The NAS needs an IP address to communicate with other devices on your network. The NAS can get
an IP address automatically if you have a device on your network that gives them out. Or you can
assign the NAS a static (fixed) IP address.
DNS Server Address
A DNS (Domain Name System) server maps domain names (like www.zyxel.com) to their
corresponding numerical IP addresses. This lets you use domain names to access web sites without
having to know their IP addresses. The NAS can receive the IP address of a DNS server
automatically (along with the NAS's own IP address). You can also manually enter a DNS server IP
address in the NAS.
C
HAPTER
(Section 10.4 on page
107) to configure the NAS's TCP/IP network
(Section 10.4.2.2 on page
(Section 10.5 on page
(Section 10.6 on page
119) to enable or disable Telnet and SSH access.
(Section 10.7 on page
120) to configure the domain name settings of
(Section 10.8 on page
Cloud Storage User's Guide
106
Control Panel
111) to configure PPPoE settings for a direct
113) to automatically configure your
122) to upload new firmware.
1 0
- Quick Links:
- Hard Disks
Hide quick links:
Advertisement
Table of Contents
