Main Nas Starter Utility Screen - ZyXEL Communications NAS326-2T User Manual

Figure 9 NAS Starter Utility Windows System Tray Icon
The first time you open the NAS Starter Utility the discovery screen appears as follows.
Figure 10 NAS Seeker
The following table describes the labels in this screen.
Table 3 NAS Seeker
LABEL
Connect
Refresh
Status
Server Name
IP Address

2.3.2 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select an NAS in the NAS Seeker screen.
Chapter 2 Find and Access Your NAS
DESCRIPTION
Select a NAS and click this to connect to it.
Click this to refresh the screen. The NAS Starter Utility does not automatically refresh.
This shows whether the NAS is Online, Unreachable, Configuring, or Config Failed.
This is the server name you configured for the NAS. If you have more than one NAS in your
network, it is recommended that you give each one a unique name for identification
purposes.
This is the current IP address of the NAS.
NAS Series User's Guide
20