Main Nas Starter Utility Screen - ZyXEL Communications NAS326 User Manual

2.3.2 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select an NAS in the NAS Seeker screen.
Figure 14 NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 4 NAS Starter Utility Main Screen
LABEL
?
Configuration
NAS Seeker
Server Name
IP Address
MAC Address
Firmware Version
Status
Capacity
DeskTop
Network Drive
Chapter 2 Find and Access Your NAS
DESCRIPTION
Click this to display the utility help.
Click this to configure system settings (see
Click this to use the NAS Seeker screen (see
a different NAS on your network.
This is the server name you configured for the NAS. If you have more than one NAS in your
network, it is recommended that you give each one a unique name for identification
purposes.
This is the current IP address of the NAS.
This is the NAS's unique physical hardware address (MAC).
This shows the version of firmware the NAS is currently using.
This shows whether the NAS is Online, Uninitialized, Unreachable, Configuring, or Config
Failed.
This shows the NAS's total, in-use, and remaining storage capacity.
Click this button to go to the Web Configurator login screen (see
Click this to add the NAS as a network drive in your computer's Windows Explorer.
NAS Series User's Guide
21
Section 2.3.5 on page 23).
Section 2.3.1 on page 19) to find and connect to
Section 3.2 on page 26).