External Usb Drives; Storage - ZyXEL Communications NAS Series User Manual

• Check the NAS's DNS setting. The DNS server the NAS is using must be able to resolve the
domain controller's address. If the domain controller uses a private IP address, the NAS needs to
use a private DNS server. If the domain controller uses a public IP address, the NAS needs to use
a public DNS server.
• Leave the domain and re-join it.
A domain user can't access a share.
In addition to the checks listed previously for local users, check that the domain controller is turned
on and connected to the network.
A user can access a share but cannot access individual folders or files within the share.
• Check the Access Control List (ACL) of read/write permissions associated with the share's
specific files and/or folders. Account names added to the list are linked to the files and folders
that they are allowed to access, along with what kinds of actions they are allowed to perform
with those files and folders (delete, move, rename, and so on).

28.7 External USB Drives

The COPY LED is red.
Copying files to or from a USB device or SD card failed. The USB device or SD card may not be
compatible with the NAS. Try to save the files onto a computer and then from the computer to the
NAS (through the network connection).

28.8 Storage

Migrating from RAID 1 to RAID 5 did not expand the storage capacity.
The NAS normally expands the storage capacity by itself after rebuilding the RAID but may not if
the NAS rebooted during the RAID re-build.
After the re-build finishes, go to the Storage screens and select the volume or disk group and click
Manage and use Expand the volume with unallocated disk space.
Chapter 28 Troubleshooting
Cloud Storage User's Guide
345