Nfs Screen - ZyXEL Communications NAS Series User Manual

18.3 NFS Screen

Use this screen to enable and configure Network File System (NFS) settings on your NAS.
NFS is a client/server distributed file service that provides transparent file sharing for network
environments. This allows shared folders in your NAS to be accessible like a local folder in a user's
computer.
Click Network > NFS to open the following screen.
Figure 146 Network > NFS
The following table describes the labels in this screen.
Table 84 Network > NFS
LABEL
NFS Service
Enable NFS Server
Disable NFS Server
Add NFS Share
NFS Session
Edit NFS Share
Delete NFS Share
(s)
The table lists your NFS shares. Click a column's heading to sort the entries by that criteria.
Status
NFS Share Path
Volume Name
DN/IP Filter
Comment
You see a warning screen before you delete a volume.
Chapter 18 Packages
DESCRIPTION
Click this to employ NFS in your NAS.
Click this to stop using NFS.
This makes all NFS shares unavailable.
Click this to add an NFS share.
Refer to Section 18.3.1 on page 248
Click this to view active NFS sessions. You can see the list of users who have access to
the NFS shares.
Refer to Section 18.3.2 on page 249
Select an NFS share from the list and click this to edit it.
Refer to Section 18.3.1 on page 248
Select an NFS share from the list and click this to delete it.
This shows whether the share is active or not.
This shows the location of the share in the NAS.
This shows the volume where the NFS share is located.
This shows which domain name(s) or IP address(es) have read/write access to the NFS
shares.
Refer to Section 18.3.1 on page 248
This shows a short description of the share.
Cloud Storage User's Guide
247
for the Add NFS Share screen.
for the NFS Session screen.
for the Edit NFS Share screen.
for the screen where you can configure this.