Edit Ip Filter - ZyXEL Communications NAS Series User Manual

Table 75 Applications > Download Service > Preferences > P2P download (continued)
LABEL
Keep Sharing While
Email notifications

Edit IP Filter

Apply
Reset
Cancel
17.7.4 Edit IP Filter
Use this screen to enable or disable IP filtering for P2P downloads. IP filtering blocks IP addresses
known to share fake files. You can either get an IP filter table from a website or use your own table.
Click Edit IP Filter in the Applications > Download Service > Preferences > P2P download
screen.
Figure 127 Applications > Download Service > Preferences > P2P download > Edit IP Filter
Chapter 17 Applications
DESCRIPTION
With P2P download, the NAS starts sharing a file while you are downloading it. Set how
long to continue sharing a file after the NAS finishes the download.
Select Upload/Download Ratio to keep sharing a file until the NAS has uploaded a
specific percent compared to the download.
Select Seeding Time to keep sharing a file for a specific number of minutes after the
download finishes.
Continuing to share a file helps other P2P download users finish downloading it. Sharing
out at least as much as you download helps keep you in good standing in the P2P
download community.
Enter -1 to share a file indefinitely. Leave both check boxes blank to have the NAS stop
sharing the file as soon as the download finishes.
If you select both options, the NAS keeps sharing a file until both conditions exceed the
values you configure. For example, you entered 150% in the Upload/Download Ratio
field and 120 minutes in the Seeding Time field. The NAS keeps sharing a file until it
has shared 1.5 times the size of the file and has passed 120 minutes.
Select whether or not to send emails to the email address configured for emailing log
reports (see Section 26.4.2 on page
seeding the file, and/or finishes downloading the file.
Click this to enable or disable IP filtering for P2P downloads.
Refer to Section 17.7.4 on page 227
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to return to the previous screen without saving.
Cloud Storage User's Guide
227
308) when the NAS starts downloading the file,
for information about the fields in this screen.