Configuring Web Configurator - ZyXEL Communications NAS Series User Manual

Table 42 Control Panel > Network > TCP/IP > Network Interface > PPPoE (continued)
LABEL
Apply
Cancel

10.4.3 Configuring Web Configurator

Click Control Panel > Network > TCP/IP > Web Configurator to configure the port number of
HTTP and HTTPs.
Figure 65 Control Panel > Network > TCP/IP > Web Configurator
The following table describes the labels in this screen.
Table 43 Control Panel > Network > TCP/IP > Web Configurator
LABEL
Port Number
Enable HTTPS
connection
Port Number
Allow only
HTTPS
connection
Apply
Cancel
Chapter 10 Control Panel
DESCRIPTION
Click this to save your changes.
Click this to return to the previous screen without saving.
DESCRIPTION
Specify the port number of HTTP connection.
Note: The port number 8082 is reserved for media streaming.
Select or clear this field to enable or disable HTTPS connection.
Specify the port number of HTTPS connection.
Select this field to allow connection to the Web Configurator via HTTPS only. Clear this
field to allow connection to the Web Configurator via both HTTP and HTTPS.
Click this to save your changes.
Click this to return to the previous screen without saving.
Cloud Storage User's Guide
112