Ftp Uploadr Preferences Screen - ZyXEL Communications NAS Series User Manual

Table 97 Applications > Auto Upload > FTP Uploadr > Add or Edit a Server (continued)
LABEL
Password
Port Number
Remote Path
Description
Test Connection
Apply
Cancel

19.5.2 FTP Uploadr Preferences Screen

Use this screen to configure the general settings for the FTP Uploadr.
In the FTP Uploadr screen, click the Preferences icon to open the following screen.
Figure 166 Applications > Auto Upload > FTP Uploadr > Preferences
The following table describes the labels in this screen.
Table 98 Applications > Auto Upload > FTP Uploadr > Preferences
LABEL
Folder Watch List
Status
Share Name
Path
Action
Chapter 19 Auto Upload
DESCRIPTION
Enter the password associated with the account name.
Enter the port number for the FTP server.
Enter the path of the FTP server where the NAS automatically uploads files.
Enter additional information about this FTP server.
Click this to test your settings and check whether you can use the settings to connect to
the FTP server.
Click this to save your changes.
Click this to return to the previous screen without saving.
DESCRIPTION
This field indicates whether the share or folder is available.
represents a valid folder. The folder is available for auto upload.
represents a missing folder. The share may be deleted from the NAS, or the hard
disk was removed from the NAS.
This is the share selected for auto upload.
This is the path of a folder selected for auto upload. The NAS only uploads files stored in
the specified share or folder to your FTP server.
Use the Remove icon to delete a folder from the Folder Watch List.
Cloud Storage User's Guide
272