Restore: Step 2; Restore: Step 3 - ZyXEL Communications NAS Series User Manual

27.4.2 Restore: Step 2

Select a previous archive backup that you want to restore to the NAS.
Figure 211 Protect > Restore: Step 2
The following table describes the labels in this screen.
Table 139 Protect > Restore: Step 2
LABEL
Step 2. Select
Restore Point
Job Name
Restored Time
Previous
Next

27.4.3 Restore: Step 3

Use this screen to select the folder where the archive you want to restore is located.
Chapter 27 Protect
DESCRIPTION
If you selected Remote NAS for the backup you want to restore, you can see a list of all the
backups you performed in the Job Name table.
If you selected Internal or External Volume for the backup you want to restore, you can
see a list of restore times for the backups you performed in the Restored Time table.
Select a previous backup job in the list that you want to restore to your NAS. Once you
choose a job name, all available restore times for that backup job shows in the Restored
Time table.
Select a previous backup job in the list that you want to restore to your NAS.
Click this to go back to the previous screen.
Click this to go to the next screen.
Cloud Storage User's Guide
334