Directory Of The Nas - ZyXEL Communications NAS Series User Manual

Table 3 NAS Starter Utility Main Screen (continued)
LABEL
MAC Address
Firmware Version
Status
Run Initialization
Wizard
Capacity
DeskTop
Network Drive
Shared Folder
myZyXELcloud

2.3.3 Directory of the NAS

In the main NAS Starter Utility screen click Shared Folder to log into the NAS's file directory in
Windows Explorer. Enter the administrator user name and password and click Login.
Figure 9 Login
The utility opens the NAS's directory in Windows Explorer.
Figure 10 Directory
Chapter 2 Getting Started
DESCRIPTION
This is the NAS's unique physical hardware address (MAC).
This shows the version of firmware the NAS is currently using.
This shows whether the NAS is Online, Uninitialized, Unreachable, Configuring, or
Config Failed.
This button displays if the NAS detects that the NAS has not yet configured any of the
installed hard disks. Click this button to go to the Web Configurator login screen (see
Section 7.2 on page 38).
This shows the NAS's total, in-use, and remaining storage capacity.
Click this button to go to the Web Configurator login screen (see
Click this to add the NAS as a network drive in your computer's Windows Explorer.
Click this to log into the NAS's file directory in Windows Explorer.
Click this to go to mycloud.zyxel.com to set up a free DDNS hostname for the NAS so you
can connect to it easily from the Internet.
Cloud Storage User's Guide
22
Section 7.2 on page 38).