Edit Job: Step 1 - ZyXEL Communications NAS Series User Manual

27.3.6 Edit Job: Step 1

Click Protect > Backup. Select a backup job from the list and click Edit Job to open the Edit Job
screen.
Figure 205 Protect > Backup > Edit: Step 1
The following table describes the labels in this screen.
Table 133 Protect > Backup > Edit: Step 1
LABEL
Job Settings
Job Name
Job Description
Backup Type
Source folder(s)/
file(s)
Backup Target
Target Path
Compression
Encryption
Bandwidth
Chapter 27 Protect
DESCRIPTION
This field is read-only and shows the name of the backup job.
Enter a short description for the backup job.
This field is read-only and shows the backup type.
This is read-only and shows the path of the source folder for backup.
This field is read-only and shows on which volume (whether internal or external) the
backup files are stored. If the target location is a remote NAS, this shows the remote IP
address.
This field is read-only and shows the target folder for the backup files.
This field is read-only and shows whether the backup employs compression.
Compression reduces the size of the file that you want to back up. Backup is then faster,
but restoring may be slower, so if backup space is not a concern and recovery speed is,
then turn off compression.
This field is read-only and shows whether the backup employs encryption.
You can have the NAS use a password to encrypt the backup files.
For backups to a remote NAS, you can restrict the bandwidth to help prevent the
backups from using all of your network connection's available bandwidth. This is more
important when backing up to a remote NAS or computer through the Internet.
Cloud Storage User's Guide
328