Pyload Screen; Owncloud Setup - ZyXEL Communications NAS Series User Manual

18.5 pyLoad Screen

Use this screen to configure the NAS so you can use pyLoad to manage your downloads, including
those from one-click hosting sites.
Click Applications > pyLoad to open the following screen.
Figure 151 Applications > pyLoad
The following table describes the labels in this screen.
Table 88 Applications > pyLoad
LABEL
Enable pyLoad
Management Page
Username
Password
Password (Confirm)
Port Number
Apply
Reset

18.6 ownCloud Setup

Use the Package Management screen to install the ownCloud package. Use ownCloud to store,
synchronize, and share files, photos, calendars, and more with computers and mobile devices. Use
the following procedure to install the ownCloud package.
Click Packages > Package and select ownCloud. Then click the Install/Upgrade icon.
1
Note: If ownCloud does not appear, click the Retrieve List from Internet icon to update
the list.
Chapter 18 Packages
DESCRIPTION
Select this to have the NAS manage your downloads. Clear it to turn the feature off.
This is the IP address and port number of the NAS's pyLoad management login screen.
The pyLoad management login screen uses the NAS's IPv4 address and the port
number you configure. Click this link to go to it.
Only the admin account can log into the pyLoad management screen.
You can configure a separate password for using the admin account to access the NAS's
pyLoad management screen.
Type the same password again to make sure you entered it correctly.
Set the pyLoad management page's port number. The range of valid port numbers is
1024~65536. Include this port number after the IP address when manually entering
the pyLoad management login page's address in your browser's address bar. For
example, 192.168.1.2:7272.
Click this to save your changes.
Click this to restore the screen's last-saved settings.
Cloud Storage User's Guide
251