Table 130 Protect > Backup: Step 2 (continued)
LABEL
Remote
Local
External
Previous
Next
27.3.3 Backup: Step 3
Use this screen to specify compression, encryption and purge policies for the backup job. This step
is only available if you are doing an archive backup or a synchronization backup to a remote target.
Chapter 27 Protect
DESCRIPTION
Select this to back up to another device.
For Archives:
The remote device can be another NAS in the network. Fill in the following fields in order
to be able to access it.
•
Remote NAS Address
•
Username
•
Password
•
Share Name
Click Test Connection to see if your NAS can communicate with the remote device.
For Synchronization:
The remote device must be another NAS compatible with the NAS's synchronization
feature. Fill in the following fields in order to be able to access it.
•
Remote NAS Address
•
Username (always "admin")
•
Remote Admin's Password
Click Show target content to connect to the remote NAS so you can select the target
share for the backup.
For Rsync:
The remote device must be a NAS that supports rsync or a computer running the rsync
utility. Fill in the following fields in order to be able to access it.
•
Remote NAS Address
•
Username (always "admin")
•
Remote Admin's Password
Click Show target content to connect to the remote NAS or computer so you can select
the target folder for the backup.
Select this if you want to place your backup in another volume in the NAS. Select the
folder where you want to place the backup.
Select this if you have a USB hard disk connected to the NAS that you want to use for
your backup. Select the folder where you want to place the backup.
Click this to go back to the previous screen.
Click this to go to the next screen.
Cloud Storage User's Guide
325