Report Config Screen - ZyXEL Communications NAS Series User Manual

Figure 189 Maintenance > Log
The following table describes the labels in this screen.
Table 116 Maintenance > Log
LABEL
Refresh
Purge all Logs
Report Config
Display
#
Time
Class
Severity
Message

26.4.1 Report Config Screen

In the Log screen, click Report Config to do the following:
• Use the Email Setting screen
alerts from the NAS.
• Use the Report Setting screen
want to receive through e-mail and schedule when the NAS e-mails the alerts.
• Use the Syslog Server Setting screen
and select the categories to include in the log report.
Chapter 26 Maintenance Screens
DESCRIPTION
Click this to update the log display.
Click this to erase all logs from the NAS.
Click this to open a screen where you can configure email alerts for logs. Refer to
26.4.1 on page 307 to see the screens for this.
The screen always shows all logs by default. Choose a specific log category to view logs for
just that category.
This is the log entry's number in the list according to the currently selected sort order.
This shows the date and time the log was created. Click the top of the column to sort by
oldest or newest.
This displays the log category; see
This displays how serious the log is rated by the NAS. See
information.
This displays a description of the log. Click the top of the column to sort by alphabetical or
reverse alphabetical order.
(Section 26.4.2 on page
(Section 26.4.3 on page
Cloud Storage User's Guide
Table 124 on page
308) to enable and configure e-mail
308) to select the type of alerts you
(Section 26.4.4 on page
307
314for details.
Table 125 on page 315for more
309) to enable the syslog server
Section