Firmware; File Transfer - ZyXEL Communications NAS Series User Manual

Replacing smaller disks in a RAID 1, RAID 5, or RAID 6 with larger capacity hard disks did not
expand the storage capacity.
The NAS normally expands the storage capacity by itself after rebuilding the RAID but may not if
the NAS rebooted during the RAID re-build.
After the re-build finishes, go to the Storage screens and select the volume or disk group and click
Manage and use Expand the volume with unallocated disk space.

28.9 Firmware

I want to know the firmware version on the NAS.
Go to the Status screen. The Firmware field shows you the current firmware version running.

28.10 File Transfer

I want to transfer my file(s) from my local computer or storage device to the NAS.
• After you initialize your hard disk, you can directly access the folders in your NAS and transfer
files in the same way you transfer files in your local computer:
On your Windows computer, click Start > Run or open a web browser.
1
Enter \\nas followed by the number of your model (540 for example) or the Server Name you
2
assigned the NAS. This shows you the folders in the NAS.
Use drag-and-drop or copy-and-paste to transfer files over to your NAS.
3
• Use the COPY/SYNC button to transfer files from an external (USB) storage device to the NAS.
I want to transfer my file(s) from the NAS to my local computer or storage device.
• After you initialize your hard disk, you can directly access the folders in your NAS and transfer
files in the same way you transfer files in your local computer:
On your Windows computer, click Start > Run or open a web browser.
1
Chapter 28 Troubleshooting
Cloud Storage User's Guide
346