Ssl Certification - ZyXEL Communications NAS Series User Manual

The following table describes the labels in this screen.
Table 120 Maintenance > Configuration
LABEL
Backup Current Configuration Settings
Backup
Restore Configuration
Browse
Restore

26.6 SSL Certification

Click Maintenance > SSL to open this screen, where you can turn on HTTPS, create a public key
certificate, or upload a public key certificate that was issued by a known certificate authority.
Figure 194 Maintenance > SSL
Chapter 26 Maintenance Screens
DESCRIPTION
Click this to save the current configuration of the NAS to your computer. A pop-up
screen appears asking you to confirm. Click OK to continue or Cancel to quit.
When you restore a file configuration, the NAS checks the volumes/share paths on
the NAS and the configuration file.
If the volume exists but the share path is missing in the NAS, the NAS automatically
creates this share path.
If the volume does not exist on the NAS, the Status of the share will show "missing
share icon" in Shares screen (see
Click this to locate a previously-saved configuration file.
Click this to load the previously-saved configuration file to the NAS. This replaces
your current NAS configuration settings with the settings in the previously-saved
configuration file.
A pop-up screen appears asking you to confirm. Click OK to continue or Cancel to
quit.
Cloud Storage User's Guide
311
Table 107 on page 292).